Fanuc Alpha Motor Part Number Specifications

 

A06B-0373-B675
Fanuc Motor and Fanuc Parts available for same day dispatch WWW.CNCSPARES.COM

Below is an explanation of the Fanuc Alpha Motor Part Number Specifications and how they are broke down and what each individual number is. You can find at the bottom of the page a part number to match the type of Fanuc encoder fitted to the motor, This will help you if you need to order a replacement encoder.

Fanuc Alpha Motor Model Part Number Specifications

Models
α1/3000 α2/2000, and α2/3000

A06B-03□□-B△◎◎

□□
71 : Model α1/3000
72 : Model α2/2000
73 : Model α2/3000


0 : Taper shaft (standard)
1 : Taper shaft with the brake (2Nm)
5 : Straight shaft
6 : Straight shaft with the brake (2Nm)

◎◎
75 : Pulse coder αA64
77 : Pulse coder αI64
88 : Pulse coder αA1000

The standard shafts used for models α1/3000, α2/2000, and α2/3000 are taper shafts.
Use a tapered shaft as far as circumstances, such as the delivery time and maintenance permit.

Models
α3/3000 α6/2000 and α6/3000

A06B-01□□-B△◎◎

□□
23 : Model α3/3000
27 : Model α6/2000
28 : Model α6/3000


0 : Taper shaft (standard)
1 : Taper shaft with the brake (8Nm)
5 : Straight shaft
6 : Straight shaft with the brake (8Nm)

◎◎
75 : Pulse coder αA64
77 : Pulse coder αI64
88 : Pulse coder αA1000

The standard shafts used for models α3/3000, α6/2000, and α6/3000 are taper shafts.
Use a taper shaft as far as circumstances, such as the delivery time and maintenance permit.

Models
α 12/2000, α12/3000, α22/1500, α22/2000,
α22/3000, α30/1200,α30/2000, α30/3000,
α40/2000, and α40/2000 (with fan)

A06B-01□□-B△◎◎

□□
42 : Model α12/2000
43 : Model α12/3000
46 : Model α22/1500
47 : Model α22/2000
48 : Model α22/3000
51 : Model α30/1200
52 : Model α30/2000
53 : Model α30/3000
57 : Model α40/2000
58 : Model α40/2000 (with fan)


0 : Straight shaft (standard)
1 : Straight shaft with the brake (35Nm)
5 : Taper shaft
6 : Taper shaft with the brake (35Nm)

◎◎
75 : Pulse coder αA64
77 : Pulse coder αI64
88 : Pulse coder αA1000

A straight shaft is fitted as the standard shaft for models α12 to α40.
When early delivery and case–of–maintenance is important, a straight
shaft should be used. For model α40, a tapered shaft is not available.

Models

α65/2000, α100/2000 and α150/2000

A06B-03□□-B△◎◎

□□
31 : Model α65/2000
32 : Model α100/2000
33 ; Model α150/2000


0 : Taper shaft (standard)
2 : Taper shaft with the brake (100Nm)

◎◎
75 ; Pulse coder αA64
77 : Pulse coder αI64
88 : Pulse coder αA1000

Models
α300/2000, α400/2000

A06B-013□-B0◎◎


7 : Model α300/2000
8 : Model α400/2000

◎◎
75 ; With the pulse coder αA64
77 : With the pulse coder αI64
88 : With the pulse coder αA1000

For these models, a tapered shaft is standard. a straight shaft is not available.
For these models, the brake option is not available.

Pulse Coder Part numbers
αA64 A860-0360-T101, A860-0360-V501, and A860-0360-T201
αI64  A860-0365-T101, A860-0365-T101
αA1000 A860-0370-T201, A860-0370-V501

fanuc-plusecoder

Fanuc Alpha I Motors

A06B-□□□□-B△○▽#◎◎◎◎
□□□□
An ordering specification number is described in the tables below.
* Every combination doesn’t exist.

0 : Taper shaft
1 : Straight shaft
2 : Straight shaft with a key groove
3 : Taper shaft with a 24VDC brake
4 : Straight shaft with a 24VDC brake
5 : Straight shaft with a keyway and a 24VDC brake
* Do not select “Straight shaft with a key groove” when a large torque or abrupt acceleration rate
is required.

0 : Standard
1 : With a fan
2 : With a high-torque brake
3 : With a high-torque brake and a fan
4 : With a strong fan
5 : With a fan
* When “With a high-torque brake” is selected (○ = 2 or 3), specify△ = 3 to 5.

0 : Pulsecoder αiA 1000
1 : Pulsecoder αiI 1000
2 : Pulsecoder αiA 16000
◎◎◎◎
0000 : Standard
0100 : IP67 specification

ais-series-fanuc-motor-200v

ais-series-fanuc-motor-400v

aif-series-fanuc-motor

Pulse Coder part numbers
αiA 1000 A860-2000-T301
αiI 1000 A860-2005-T301
αiA 16000 A860-2001-T301

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s